The perfect amp to reproduce the sound of any acoustic instrument or voice!

Every one of its components, from preamplifiers to loudspeakers, has been designed for natural and accurate response. UNICO's circuitry is designed like the circuits found in professional-quality recording studio electronics - you will hear the difference in accuracy and precision when compared to other acoustic combo amplifiers.
 
  The UNICO has a built-in analog spring reverb designed using an innovative Class A circuit producing the smooth and musical, even subtle reverb sound guitarists, violin players and others have been seeking. Close your eyes and listen to the sound of your instrument combined with the UNICO's rich reverb, a sound more often found in the concert hall than in the inexpensive digital effects processors of many acoustic amplifiers.
 
  By changing the size and shape of the amplifier, we have achieved softer bass.
  We have also introduced a gain control function across the channels for improved input level control – this is vital for a clean signal. Mid control has been added to the DYN and STAT channels and a four-band equalizer is now available in the MIC channel to suit the needs of demanding musicians. More compact and with it's new shape Unico is even easier to carry!

Two power amps with an active crossover produce 200 Watts RMS and combined with a 8" woofer and a 1" dome tweeter guarantee velvety and clear harmonics with a controlled and strong low end (down to 40Hz). The technology of biamplification delivers very transparent and clear sound as well as providing maximum efficiency by properly matching amplifiers to loudspeakers. Each power amp has its own limiter circuitry, providing secure speaker protection. Power amps are built with bipolar transistors (no MOS-FET) and are energized by a robust, traditional power supply (toroidial transformer).

The result you will hear after seconds testing the UNICO.

DESCRIPTION
Box two way, bass reflex

ENCLOSURE SECTION

• Construction : Plywood
• Weight : 15.4 Kg
• Dimensions : 34cm x 31cm x 43cm

AMPLIFIED SPEAKER SECTION

• Frequency resp. : 40Hz : 22KHz
• Sensitivity : (1W-1m) 93dB
• SPL max : 112dB

TECHNICAL SPECIFICATIONS INPUTS

• MIC
• Connector : XLR balanced
• Sensitivity : 0dB to -40dB
• Impedance : 4.7Kohm
• DYN
• Connector : XLR balanced, JACK 6,3mm unbalanced
• Sensitivity : +5dB to -35dB
• Impedance : 10Kohm
• STAT
• Connector : JACK 6,3mm unbalanced
• Sensitivity : +10dB to -30dB
• Impedance : 10Kohm

TECHNICAL SPECIFICATIONS OUTPUTS

• LINE OUT
• Connector : JACK 6,3mm unbalanced
• Sensitivity : -2dB
• Impedance : 200ohm
• DI OUT
• Connector : XLR balanced
• Sensitivity : -15dB
• Impedance : 200ohm
• AUX OUT
• Connector : JACK 6,3mm balanced
• Sensitivity : 0dB
• Impedance : 200ohm

INTERNAL EFFECT (spring reverb)

• Freuency resp. : 200Hz : 10KHz
• Delay Time : c.a. 30ms
• Reverb time : c.a. 2s

COMPONENTS

• Woofer : 8"
• Tweeter : Dome
• Cross-over : Active, 24dB/octave
• Amplifier : Biamplified 200W RMS power, 0.1% THD, 8ohm, 320W Peak